To order, please email us!
Aftermarket VNT17 - Price: C $995 / US $750Comes with:
Exhaust Manifold and Turbo Down Pipe Gaskets
Copper Flashed Steel Exhaust Manifold Nuts
Flexible oil input line with fittings (not the externally braided hose that wears thru aluminium!)
1.5" hose adapter
Max boost: 1.6bar / 24psi, 160hp to 180hp with correct supporting modifications1 Year / 20.000km warranty via Fast Forward Automotive when correctly installed and Malone Tuning software is purchased.
GENUINE HONEYWELL GT1749VB turbo, ALH fitment - Price: C $1150 / US $875Comes with:
Modified compressor housing to fit 100% bolt-on for the ALH 1.5" hose fitting
Max boost: 1.6bar / 24psi, 160hp to 180hp with correct supporting modifications1 Year / 20.000km warranty via Honeywell when correctly installed.
GTB1756VK 6+6 billet wheel turbo - Price: C $1500 / US $11402" intercooler hose outlet, 210hp to 240hp with correct supporting modifications
GTD1756VRK 7+7 billet wheel turbo - Price: C $1800 / US $13702" intercooler hose attachment Ceramic Ball Bearings, 230 to 260hp with correct supporting modifications
GTB2060VK 11+0 billet wheel turbo -Price: C $1700 / US $12902" intercooler hose attachment, 280+ hp with correct supporting modifications
GTB2060VKLR 11+0 billet wheel turbo - Price: C $1750 / US $13302" intercooler hose attachment Ceramic Ball Bearings, 290+hp with correct supporting modifications
GTB2260VKLR 11+0 billet wheel turbo - Price: C $1800 / US $13702" intercooler hose attachment, Ceramic Ball Bearings, 310+hp with correct supporting modifications
AHU58 7+7 billet wheel turbo - Price: C $1250 / US $9502" intercooler hose attachment Bolts on to 1Z/AHU manifold, rated up to 220hp
To order, please email us!
Firad 216µm nozzles - Price: C $200 / US $150approx 120hp to 160hp, with appropriate software
Firad 230µm nozzles - Price: C $200 / US $150approx 120hp to 160hp, with appropriate software
Firad 260µm nozzles - Price: C $200 / US $150approx 160hp to 210hp, with appropriate software
Firad 300µm nozzles - Price: C $250 / US $190approx 200hp to 250hp, with appropriate software and 11mm injector pump
Firad 330µm nozzles - Price: C $300 / US $230approx 240hp to 320hp, with appropriate software and 12mm injector pump
Firad 360µm nozzles - Price: C $400 / US $300adequate hp, with appropriate software and injector pump
Flexible Turbo Oil Supply Line for VNT15 VNT17
A flexible oil supply line is essential when replacing your turbo as you more than likely going to break the soft aluminium factory hard line. Unlike all the other flexible lines on the market, this one does not have braided stainless steel on the exterior. This is good because braided stainless steel lines will cut thru rubber hoses and wear spots into aluminium over time. Our supply line super flexible and rated for 200 Bar / 3000 PSI working pressure, which far exceeds the oil pressure system of your TDI Engine!
Price: C $100 / US $75
Free Shipping to Canada and the USA!
Please Email us to order!
Most TDIs have a stock 2.5 bar MAP sensor, which is good for up to 25 PSI boost pressure. To go for a Stage 4 or higher tune a 3.0 or 4.0 bar MAP sensor is required.
Compatibility: Most *tuned* cars, installing on a non-tuned car will result in a bad day!
3 bar MAP Price: C $50 / US $40
4 bar MAP Price: C $75 / US $57To order, please use the "Add to Cart" button at the bottom of this section.